Ice Dying: The Art of Trial & Error

One of my recent passion projects has been to master ice dying. I love that unpredictable water color / ink running look on textiles, and I had dreams of incorporating something like that into my background fabric for future fiber art projects. Plus, I wanted some cool new colorful clothes for summer!

With my schedule wide open due to COVID-19 cancellations, I read up on ice dying, collected materials, and gave it a go. My fist batch was a huge disappointment, but I learned a few things and kept at it. Here’s my DIY tutorial on ice dying (including all of my lessons learned along the way). This is such a fun summer project - use these hot days to your advantage!

The beauty of ice dying is you have almost no control over the outcome. Sure, you can choose your colors and garments, you can sprinkle the dye or dump concentrated sections of dye, but other that that, the ice is going to decide your pattern. Try scrunching up your fabric, try laying it flat, try dying a second time overtop of your first round, if you’re not completely happy with the results. Just have fun!

Check out the 60 second process video at the end of this post so you can see the magic for your self.

SUPPLY LIST

DYE: You’ll need a high quality powder dye. I tried a few dye products and had the best results with Jacquard Procion MX Fiber Reactive Cold Water Dye which can be purchased on Amazon or Dick Blick. There’s a huge range of colors, and the dye yields wonderfully vibrant colors on the fabric.

LESSON LEARNED: I know it’s tempting to use Rit dye. I know this because that’s what I did, and why my first three batches didn’t work out. Rit dye is easy to find, its inexpensive, they have enough colors to get you started, they even have an ice dying DIY article on their website, but I had zero success with it. Even after adding a Rit dye color fixer product, the color always appeared washed out.

SODA ASH: This can be purchased at fabric stores or online. You’ll mix water with the soda ash to make a soaking solution for your fabric before you dye it.

LESSON LEARNED: Be sure to soak at least 20 minutes.

MASK & GLOVES: we’re in a pandemic so you probably have these already! Wear both when mixing your soda ash, and when sprinkling the dye powder. Both products get airborne very easily and you do not want to be breathing that. Also wear the gloves when coming into contact with the soda ash soak even once the powder has dissolved (it’s caustic). I would recommend wearing the gloves when handling the wet dyed fabric as well so you don’t stain your hands.

SYNTHROPOL: This speciality laundry detergent is great for hand dyed fabrics. You can use it for a pre-wash if needed, and to wash out any excess dye at the end.

ICE: Depending on how many items you’re dying at once, you’ll need at least a 10 pound bag of ice.

LESSON LEARNED: Just go ahead and buy the $2.79 pound bag of ice from the store. The ice maker in your fridge probably can’t keep up with this project.

DYE AREA THAT DRAINS: Use a tub or tray (that’s deep enough to catch an inch or two of water) with a rack overtop. I used large storage bins and some wire shelving that I already had on hand from a closet up-fit. You could also use a a cookie cooling rack, a window screen, a dish drain…get creative and don’t feel like you have to spend a lot here!

FABRIC: I found white or light colored clothing at Goodwill that had a high cotton content. I also purchased some blank white items from the craft store (bandanas, t-shirts, zipper pouches, etc.)

10 Step DIY:

1. Pre-wash the fabric with Synthropol and allow to dry.

2. Mix soda ash and water, and soak fabric for at least 20 minutes.

3. Wring excess soda ash water, and place fabric on your racks.

4. Place generous amounts of ice over clothing.

5. Sprinkle powder dye over ice. If you want intense color sections, use more dye in one area. If you want a light wash, sprinkle dye lightly over ice.

6. Allow ice to melt.

7. Once ice is melted, squeeze fabric to remove excess dye.

8. Rinse fabric under cold tap water to remove excess dye.

9. Wash with Synthropol and allow to dry.

10. Iron if needed.

Virtual Workshops

This has been months in the making, and I’m excited to finally share my first virtual workshops with you! I don’t know if or when I’ll be teaching again in-person this year due to the COVID-19 epidemic, so it was finally time to take my workshops to the virtual realm. Check out the new DIY section on my website!

I have always had students who live in other states and countries who were never able to participate in my classes, and I’ve also had local students who just can’t make the in-person workshops work with their schedules, so I hope this new option will be a good thing for everyone.

The first two virtual workshops I’m offering are my 2 most popular classes - Needle Felted Succulents and 2D Hoop Art. Both of these classes are beginner level so no prior experience is required, but you’ll work up to a more advanced project by the time you go through the lessons. I’ll also show you everything you need to know about tools, materials, and techniques, plus I’ll share some tips and trips I learned the hard way when I first started needle felting in 2009.

Enroll in cactus workshop

Purchase cactus kit

Enroll in hoop art workshop

Purchase hoop art kit

If you prefer to purchase your own supplies, or you already have some, that’s totally fine! I’ll let you know what you need for each class. However, if you need to purchase materials, I have kits available on my website that have exactly what you’ll need to follow along with the workshop. Enroll in the workshops and shop supplies in the new DIY section on my website.

What other classes would you like to see me offering in the future? Leave your ideas in the comments below or send a message through the contact form. I would love to hear from you!

GreenCraft: Making an Upcycled Suede Necklace

It's an honor to have my suede fringe necklace featured in this month's GreenCraft Magazine! This is one of my favorite jewelry projects to make, and it's a great way to use up a variety of miscellaneous suede and leather scraps (which I happen to have a lot of around the studio). My whole handmade jewelry business Once Again Sam is centered around using recycled materials, and leather has always been the most dear to me. I enjoy searching for outdated suede clothing at the thrift store, and giving it new life, once again, in a whole new way as bold but wearable jewelry. 

Below is a step by step tutorial on how to make the statement necklace shown in the GreenCraft article, as well as a #MakersEyeView sharing a time-lapse video of the process from start to finish. Enjoy, and happy crafting!

How to make a suede fringe necklace: 

1. Gather material: I use thrift store clothing as my suede and leather source, but just about anything will work as long as it doesn't fray when cut. 

2. Cut strips: use scissors to cut an assortment of 1/4" wide strips (the length is up to you, mine are about 2 1/2 to 3"). The necklace in the photo used over 150 pieces total, in 20 different colors. 

3. Create pointed ends: give one end of each piece a pointed shape, so they'll have that "fringe" look when strung together. They don't have to be perfect!

4. Punch holes: use an 1/8" circle leather punch to punch a small hole through the top of each piece (the flat end, not the end with the point).

5. Make your chain: cut a length of thin chain around 18-20" (depending on where you want the necklace to lay on your chest), then add a clasp to one end so the leather pieces wont fall off once you begin stringing them on. The chain needs to be thin enough to go through the punched holes. I attached a needle to the end of my chain to make threading easier, because my punched hole was just barely big enough to accept the chain.

6. Start stringing: once you have your colors in the order you want them, begin adding your suede strips one by one until you're happy with the overall size.

GreenCraft has featured two of my upcycled jewelry projects in the past, and those tutorials can also be found on my blog:

Click HERE for suede fringe earring project

Click HERE for suede cuff project

Learning Shibori Dying

Getting my hands dirty is something I look forward to. Dying my hands blue….well, that was new for me until recently. I took a Shibori dying class this weekend, and as always, learning something new and unrelated to anything else I’m involved with, tends to inspire me in unexpected ways. Not only did I learn about the historical significance of indigo, but also practical information about working with natural dyes. I can admit this now, after the fact, that I didn’t realize indigo was a plant. I guess I always assumed it was a mineral or chemical compound, but it’s actually a crop, one that’s making a major comeback on American farms. Who knew! Well, you might have known, but I certainly didn’t.

The class was organized by The Maker’s Collective, taught by Catherine Cross of the Summer Blues Indigo Dying Workshop, and hosted at Knack here in Greenville, SC. Our group spent the first hour watching demonstrations of different techniques, learning an overview of Shibori dying, followed by two hours of our own hands-on experiments. We used clothespins, rubber bands, clamped plywood, and lots of other random stuff to resist the dye in certain areas, creating all sorts of interesting and unpredictable patterns on test fabric, and eventually “real” stuff like clothing. I brought some white leather scraps from my studio, just to see if it would work, and was thrilled with the results. It was such a blast!

A few of my finished pieces

Some of my pieces turned out beautifully, but most did not. I couldn’t get the dye to do exactly what I wanted, but it’s nice to give up control sometimes. Here’s why my so called failures are actually good for the health of my creativity:

I need freedom to fail sometimes. I need freedom of process, to experiment with new mediums that may or may not complement the work I do for my handmade business Once Again Sam. My average day is filled with production, making finished items to fulfill orders, all of which have to look a certain way. My business is booming, which is exciting, but I don’t often have time to just dabble and screw around in the studio like I used to. I have to be diligent with my time and make make make, otherwise by business might fail.

The thing is, my business won’t fail just because I took a few hours one Saturday afternoon to go learn something cool like Shibori dying rather than working on orders. It’s healthy to get out once in awhile and try something new, just for fun, just to keep my creative juices flowing. Experimenting with different mediums is how my business started, and I have to step back and remember that, and choose to pursue more of it, because it will help me grow. Afterall, I’m a maker (who currently has blue hands), not a factory.

GreenCraft Article Published

Writing and crafting: two of my favorite things. I'm excited to announce my second DIY article was recently published in GreenCraft Magazine! I so enjoy reading this magazine, it appeals to my love of up-cycling and repurposing, and I always find inspiration for new eco-friendly projects with every issue. It's a complete honor to be able to contribute my DIY guide to making suede fringe earrings to the Autumn issue of GreenCraft. 

I would say 99% of my writing is fiction, but once in awhile I get the itch to share facts and real life experiences, and I'm lucky enough that GreenCraft has allowed me the opportunity to share this DIY article with them and their readers. I hope you enjoy the magazine, there are so many great projects in the Autumn issue! http://stampington.com/GreenCraft-Magazine-Autumn-2014